fbpx
ENJOY DISCOUNT THIS WEEK | NEW GRIP SPRAY BACK IN STOCK

Instructions

Instructions

Please read more on how to apply our products to get the most out of it. If you don’t apply it correct it may not function the way you want. Check our FAQ for answers on most questions.

GripGel - How to apply

Remember: Shake before use! Don't take too much, start small and add more instead. Don't blow or wave your hands after applying. If you get white, it's not applied correct. If your hand palms are warmed up it is easier for the gel to go in. Rub your hands really intense so the palms get warm and really absorbs the gel. Do it for 5-10 seconds until it gets a little sticky - then stop!. You can also try to apply after warm-up. Enjoy your superb grip with whatever grip tape you have. Old, new, expensive or cheap 🙂

GripGel - Video

GripSpray - How to apply

Remember: Shake before use! Don't take too much, start small and add more instead. Don't blow or wave your hands after applying. Spray once on your palm and rub it in with the same hand as you sprayed on. You can also test to spray on the surface you want to get sticky but effect can vary,

GripSpray - Video

Coming soon.

Racket Protection - How to apply

Remember: Apply when you are not stressed. Use a heat gun, gas burner or gas stove. You want high temperature and really heat up the glue and protection tape. Keep it 7-10 cm from the flame and then press the tape to the racket.

Second option is to use a hair dryer, but make sure to really put heat on it. We don't accept reclamations if installed with hair dryer. Avoid having the tape in too cold temperature. If tape loosens from the glue, heat the glue up with a heat gun and press down the tape, or add extra glue. This is often caused by temperature changes.

Racket Protection - Video (NEW VIDEO COMING SOON)

Contact Us